2011 BMW M3 S65B40 (E90/E92/E93)

E90/E92/E93 / Sedan / Coupe / Convertible / Global (Europe, North America, Asia, selected markets)

S65B40Fiche exacte année/versionGold

Engine identity

Engine code

S65B40

Engine summary

4.0L naturally aspirated V8, high-revving engine used in all body styles

Displacement

3999 cc

Power

414 hp (310 kW) at 8300 rpm

Torque

400 Nm (295 lb-ft) at 3900 rpm

Fuel system

Direct fuel injection, individual throttle bodies

Timing drive

Double-VANOS variable valve timing, chain-driven camshafts

Port OBD

Verify by VIN and market

Oils and fluids

Type d’huile

BMW Longlife-01 approved synthetic oil

Capacité d’huile

Approx. 7.5 liters service-fill including filter change

Liquide de refroidissement

Approx. 10 liters

Fluide

BMW ATF or equivalent synthetic fluid as per service manual

Differential fluid

BMW M Limited Slip Differential specific fluid

Liquide de frein

DOT 4 minimum, BMW recommended brake fluid

Service and parts data

Manual transmission

6-speed Getrag manual (standard in most markets)

Automatic transmission

7-speed SMG automated manual (optional, less common globally)

Spark plugs

NGK or Bosch OEM iridium plugs, replaced per service interval

Service interval

Typically every 15,000 miles (24,000 km) or 1 year, whichever sooner

Dimensions des pneus

Front: 245/35ZR18, Rear: 265/35ZR18

Couple de roue

Verify by VIN and market

Common and chronic problems

Rod bearing wear on early models
SMG clutch and pump wear in automated transmissions
Carbon buildup under intake valves

First checks

Rod bearing condition
SMG hydraulic pump pressure
Suspension top mount wear

Avant de remplacer des pièces

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Same S65 V8 engine across sedan (E90), coupe (E92), and convertible (E93) models with minor regional tuning differences.
SMG transmission availability depends on market; manual is predominant globally.
Oil capacity and service intervals may vary slightly by market and engine variant.

Codes courants

Source and verification notes

BMW official technical specifications and factory service manuals 2011.
Verified data from enthusiast community technical builds and maintenance records.

Outils compatibles

Verify by VIN and market

Questions fréquentes

What engine code does the 2011 BMW M3 S65B40 (E90/E92/E93) use? 2011 BMW M3 S65B40 (E90/E92/E93) is listed here with engine code S65B40; engine summary: 4.0L naturally aspirated V8, high-revving engine used in all body styles.
What oil and capacity does the 2011 BMW M3 S65B40 (E90/E92/E93) use? 2011 BMW M3 S65B40 (E90/E92/E93) is listed with BMW Longlife-01 approved synthetic oil and oil capacity Approx. 7.5 liters service-fill including filter change. Confirm market and engine option before service.
What are common 2011 BMW M3 S65B40 (E90/E92/E93) problems? Highlighted checks for 2011 BMW M3 S65B40 (E90/E92/E93): Rod bearing wear on early models, SMG clutch and pump wear in automated transmissions, Carbon buildup under intake valves.

Engine identity

Engine code

S65B40

Engine summary

4.0L naturally aspirated V8, high-revving engine used in all body styles

Displacement

3999 cc

Power

414 hp (310 kW) at 8300 rpm

Torque

400 Nm (295 lb-ft) at 3900 rpm

Fuel system

Direct fuel injection, individual throttle bodies

Timing drive

Double-VANOS variable valve timing, chain-driven camshafts

Port OBD

Verify by VIN and market

Oils and fluids

Type d’huile

BMW Longlife-01 approved synthetic oil

Capacité d’huile

Approx. 7.5 liters service-fill including filter change

Liquide de refroidissement

Approx. 10 liters

Fluide

BMW ATF or equivalent synthetic fluid as per service manual

Differential fluid

BMW M Limited Slip Differential specific fluid

Liquide de frein

DOT 4 minimum, BMW recommended brake fluid

Service and parts data

Manual transmission

6-speed Getrag manual (standard in most markets)

Automatic transmission

7-speed SMG automated manual (optional, less common globally)

Spark plugs

NGK or Bosch OEM iridium plugs, replaced per service interval

Service interval

Typically every 15,000 miles (24,000 km) or 1 year, whichever sooner

Dimensions des pneus

Front: 245/35ZR18, Rear: 265/35ZR18

Couple de roue

Verify by VIN and market

Questions fréquentes

What engine code does the 2011 BMW M3 S65B40 (E90/E92/E93) use? 2011 BMW M3 S65B40 (E90/E92/E93) is listed here with engine code S65B40; engine summary: 4.0L naturally aspirated V8, high-revving engine used in all body styles.

What oil and capacity does the 2011 BMW M3 S65B40 (E90/E92/E93) use? 2011 BMW M3 S65B40 (E90/E92/E93) is listed with BMW Longlife-01 approved synthetic oil and oil capacity Approx. 7.5 liters service-fill including filter change. Confirm market and engine option before service.

What are common 2011 BMW M3 S65B40 (E90/E92/E93) problems? Highlighted checks for 2011 BMW M3 S65B40 (E90/E92/E93): Rod bearing wear on early models, SMG clutch and pump wear in automated transmissions, Carbon buildup under intake valves.

2011 BMW M3 S65B40 (E90/E92/E93)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Avant de remplacer des pièces

Important notes

Scanning Engine...

2011 BMW M3 S65B40 (E90/E92/E93)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Avant de remplacer des pièces

Important notes