2005 MITSUBISHI Lancer 4G18/4G63 (CK)

CK / Sedan / Hatchback / Wagon (market dependent) / Global (notably Japan, Asia-Pacific, Europe, North America with notable variations)

4G184G634G92Exakter Jahres-/Varianten-DatensatzSilver

Engine identity

Engine code

4G18, 4G63, 4G92

Engine summary

2005 Lancer commonly had 1.5L SOHC 4G15, 1.6L SOHC 4G18 or DOHC 4G92 engines in Asia, and 2.0L DOHC 4G63 in performance trims and some markets; North America featured primarily 2.0L 4G63 engines in ES trims.

Displacement

1496 to 1997 cc, depending on engine code and market

Power

Approximately 109 hp (4G18) to 148 hp (4G63)

Torque

Between 143 Nm to 194 Nm depending on engine variant

Fuel system

Multi-point fuel injection

Timing drive

Timing belt (4G63 and 4G92 engines), timing chain on some 4G18 variants

OBD-Port

Verify by VIN and market

Oils and fluids

Öltyp

SAE 5W-30 or SAE 10W-30, API SJ or higher, refer to local market variation

Ölmenge

Approximately 3.8 L (service-fill with filter change, 4G63 engine)

Kühlmittel

Approximately 6 L

Flüssigkeit

Mitsubishi Diamond ATF SP-III or equivalent

Differential fluid

GL-5 90W gear oil (if applicable)

Bremsflüssigkeit

DOT 3 or DOT 4 (market dependent)

Service and parts data

Manual transmission

5-speed manual (common variant, depending on market)

Automatic transmission

4-speed automatic available in many markets

Spark plugs

NGK BKR6E-11 or equivalent, gap ~0.9mm

Service interval

Typically 10,000 km or 6 months, varies by market

Reifengrößen

185/65 R14, 195/60 R15, 205/50 R16

Radmoment

Verify by VIN and market

Common and chronic problems

Timing belt wear and replacement critical on 4G63
Power window motor failures in some markets
Rear suspension bushings wear

First checks

Timing belt condition and service records
Cooling system leaks
Clutch and transmission fluid condition

Vor dem Teiletausch

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Exact trim levels and engine codes vary significantly by market (Japan, North America, Asia-Pacific).
Performance-oriented trims in some markets use the 4G63 DOHC engine with turbo variants available in limited editions (not covered here).
Oil capacity and fluid specs based on 4G63 engine; other engines may vary slightly.
Body style availability (sedan, wagon, hatchback) depends on regional market.

Häufige Codes

Source and verification notes

Mitsubishi CK Lancer technical specifications catalogues 2004-2006
Global automotive data archives and enthusiast maintenance guides

Kompatible Werkzeuge

Verify by VIN and market

Häufige Fragen

What engine code does the 2005 MITSUBISHI Lancer 4G18/4G63 (CK) use? 2005 MITSUBISHI Lancer 4G18/4G63 (CK) is listed here with engine code 4G18, 4G63, 4G92; engine summary: 2005 Lancer commonly had 1.5L SOHC 4G15, 1.6L SOHC 4G18 or DOHC 4G92 engines in Asia, and 2.0L DOHC 4G63 in performance trims and some markets; North America featured primarily 2.0L 4G63 engines in ES trims..
What oil and capacity does the 2005 MITSUBISHI Lancer 4G18/4G63 (CK) use? 2005 MITSUBISHI Lancer 4G18/4G63 (CK) is listed with SAE 5W-30 or SAE 10W-30, API SJ or higher, refer to local market variation and oil capacity Approximately 3.8 L (service-fill with filter change, 4G63 engine). Confirm market and engine option before service.
What are common 2005 MITSUBISHI Lancer 4G18/4G63 (CK) problems? Highlighted checks for 2005 MITSUBISHI Lancer 4G18/4G63 (CK): Timing belt wear and replacement critical on 4G63, Power window motor failures in some markets, Rear suspension bushings wear.

Engine identity

Engine code

4G18, 4G63, 4G92

Engine summary

Displacement

1496 to 1997 cc, depending on engine code and market

Power

Approximately 109 hp (4G18) to 148 hp (4G63)

Torque

Between 143 Nm to 194 Nm depending on engine variant

Fuel system

Multi-point fuel injection

Timing drive

Timing belt (4G63 and 4G92 engines), timing chain on some 4G18 variants

OBD-Port

Verify by VIN and market

Oils and fluids

Öltyp

SAE 5W-30 or SAE 10W-30, API SJ or higher, refer to local market variation

Ölmenge

Approximately 3.8 L (service-fill with filter change, 4G63 engine)

Kühlmittel

Approximately 6 L

Flüssigkeit

Mitsubishi Diamond ATF SP-III or equivalent

Differential fluid

GL-5 90W gear oil (if applicable)

Bremsflüssigkeit

DOT 3 or DOT 4 (market dependent)

Service and parts data

Manual transmission

5-speed manual (common variant, depending on market)

Automatic transmission

4-speed automatic available in many markets

Spark plugs

NGK BKR6E-11 or equivalent, gap ~0.9mm

Service interval

Typically 10,000 km or 6 months, varies by market

Reifengrößen

185/65 R14, 195/60 R15, 205/50 R16

Radmoment

Verify by VIN and market

Important notes

Exact trim levels and engine codes vary significantly by market (Japan, North America, Asia-Pacific).

Performance-oriented trims in some markets use the 4G63 DOHC engine with turbo variants available in limited editions (not covered here).

Oil capacity and fluid specs based on 4G63 engine; other engines may vary slightly.

Body style availability (sedan, wagon, hatchback) depends on regional market.

Häufige Fragen

What engine code does the 2005 MITSUBISHI Lancer 4G18/4G63 (CK) use? 2005 MITSUBISHI Lancer 4G18/4G63 (CK) is listed here with engine code 4G18, 4G63, 4G92; engine summary: 2005 Lancer commonly had 1.5L SOHC 4G15, 1.6L SOHC 4G18 or DOHC 4G92 engines in Asia, and 2.0L DOHC 4G63 in performance trims and some markets; North America featured primarily 2.0L 4G63 engines in ES trims..

What oil and capacity does the 2005 MITSUBISHI Lancer 4G18/4G63 (CK) use? 2005 MITSUBISHI Lancer 4G18/4G63 (CK) is listed with SAE 5W-30 or SAE 10W-30, API SJ or higher, refer to local market variation and oil capacity Approximately 3.8 L (service-fill with filter change, 4G63 engine). Confirm market and engine option before service.

What are common 2005 MITSUBISHI Lancer 4G18/4G63 (CK) problems? Highlighted checks for 2005 MITSUBISHI Lancer 4G18/4G63 (CK): Timing belt wear and replacement critical on 4G63, Power window motor failures in some markets, Rear suspension bushings wear.

2005 MITSUBISHI Lancer 4G18/4G63 (CK)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Vor dem Teiletausch

Important notes

Scanning Engine...

2005 MITSUBISHI Lancer 4G18/4G63 (CK)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Vor dem Teiletausch

Important notes