2007 BMW 5 Series 550i N62B48 (E60)

E60 / Sedan / Touring / Global (primarily North America, Europe, Asia),

N62B48Exact year/trim recordSilver

Engine identity

Engine code

N62B48

Engine summary

4.8 L V8 naturally aspirated engine, DOHC, variable valve timing (VANOS), variable valve lift (Valvetronic)

Displacement

4,799 cc

Power

360 hp (265 kW) @ 6,500 rpm (varies slightly by market)

Torque

500 Nm (369 lb-ft) @ 3,800 rpm (market dependent)

Fuel system

Electronic fuel injection

Timing drive

Chain-driven dual overhead camshafts with VANOS and Valvetronic

OBD port

Early E34 models commonly use the 20-pin BMW diagnostic connector in the engine bay; later OBD market equipment varies.

Oils and fluids

Oil type

BMW Longlife-01 5W-30 synthetic or equivalent meeting ACEA A3/B4

Oil capacity

7.0 liters including service fill and oil filter change

Coolant

10.5 liters

Fluid

BMW ATF synthetic fluid, change interval approx. 100,000 km or vehicle specific

Differential fluid

BMW synthetic hypoid gear oil, change interval per maintenance schedule

Brake fluid

DOT 4, change every 2 years recommended

Service and parts data

Manual transmission

6-speed manual available in some markets

Automatic transmission

6-speed automatic (Steptronic)

Spark plugs

BMW double platinum, approx. 90,000 km change interval

Service interval

Typical 15,000 km or 1 year, BMW Longlife service adaptable to driving conditions

Tire sizes

Front: 245/40ZR18, Rear: 275/35ZR18

Wheel torque

120 Nm typical for BMW 5 Series E34 wheel bolts; verify wheel type.

Common and chronic problems

VANOS unit failure
Oil leaks from valve cover gaskets
Water pump and thermostat wear
Displacement on demand system issues not present in 2007 (introduced 2008)

First checks

Watch for oil leaks especially around valve covers and oil pan
Check VANOS system for fault codes
Inspect cooling system hoses and radiator for leaks

Before replacing parts

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

This generation 550i uses the N62 engine before introduction of direct injection (N63) in 2008
Technical specifications may vary slightly by market due to emission and power regulations

Common codes

Source and verification notes

BMW E60 5 Series technical manuals and service guides
Independent technical reviews and BMW enthusiast documentation (e.g. Bimmerfest, BMWWiki)

Compatible tools

BMW 20-pin adapter
OBD2 scanner for later markets
Multimeter
Smoke tester
Cooling system pressure tester

FAQ

What engine code does the 2007 BMW 5 Series 550i N62B48 (E60) use? 2007 BMW 5 Series 550i N62B48 (E60) is listed here with engine code N62B48; engine summary: 4.8 L V8 naturally aspirated engine, DOHC, variable valve timing (VANOS), variable valve lift (Valvetronic).
What oil and capacity does the 2007 BMW 5 Series 550i N62B48 (E60) use? 2007 BMW 5 Series 550i N62B48 (E60) is listed with BMW Longlife-01 5W-30 synthetic or equivalent meeting ACEA A3/B4 and oil capacity 7.0 liters including service fill and oil filter change. Confirm market and engine option before service.
What are common 2007 BMW 5 Series 550i N62B48 (E60) problems? Highlighted checks for 2007 BMW 5 Series 550i N62B48 (E60): VANOS unit failure, Oil leaks from valve cover gaskets, Water pump and thermostat wear, Displacement on demand system issues not present in 2007 (introduced 2008).

Engine identity

Engine code

N62B48

Engine summary

4.8 L V8 naturally aspirated engine, DOHC, variable valve timing (VANOS), variable valve lift (Valvetronic)

Displacement

4,799 cc

Power

360 hp (265 kW) @ 6,500 rpm (varies slightly by market)

Torque

500 Nm (369 lb-ft) @ 3,800 rpm (market dependent)

Fuel system

Electronic fuel injection

Timing drive

Chain-driven dual overhead camshafts with VANOS and Valvetronic

OBD port

Early E34 models commonly use the 20-pin BMW diagnostic connector in the engine bay; later OBD market equipment varies.

Oils and fluids

Oil type

BMW Longlife-01 5W-30 synthetic or equivalent meeting ACEA A3/B4

Oil capacity

7.0 liters including service fill and oil filter change

Coolant

10.5 liters

Fluid

BMW ATF synthetic fluid, change interval approx. 100,000 km or vehicle specific

Differential fluid

BMW synthetic hypoid gear oil, change interval per maintenance schedule

Brake fluid

DOT 4, change every 2 years recommended

Service and parts data

Manual transmission

6-speed manual available in some markets

Automatic transmission

6-speed automatic (Steptronic)

Spark plugs

BMW double platinum, approx. 90,000 km change interval

Service interval

Typical 15,000 km or 1 year, BMW Longlife service adaptable to driving conditions

Tire sizes

Front: 245/40ZR18, Rear: 275/35ZR18

Wheel torque

120 Nm typical for BMW 5 Series E34 wheel bolts; verify wheel type.

FAQ

What engine code does the 2007 BMW 5 Series 550i N62B48 (E60) use? 2007 BMW 5 Series 550i N62B48 (E60) is listed here with engine code N62B48; engine summary: 4.8 L V8 naturally aspirated engine, DOHC, variable valve timing (VANOS), variable valve lift (Valvetronic).

What oil and capacity does the 2007 BMW 5 Series 550i N62B48 (E60) use? 2007 BMW 5 Series 550i N62B48 (E60) is listed with BMW Longlife-01 5W-30 synthetic or equivalent meeting ACEA A3/B4 and oil capacity 7.0 liters including service fill and oil filter change. Confirm market and engine option before service.

What are common 2007 BMW 5 Series 550i N62B48 (E60) problems? Highlighted checks for 2007 BMW 5 Series 550i N62B48 (E60): VANOS unit failure, Oil leaks from valve cover gaskets, Water pump and thermostat wear, Displacement on demand system issues not present in 2007 (introduced 2008).

2007 BMW 5 Series 550i N62B48 (E60)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes

Scanning Engine...

2007 BMW 5 Series 550i N62B48 (E60)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes