2006 BMW 7 Series 750i N62B48 (E65/E66)

E65/E66 / Sedan / Global (with variations by region)

N62B48Exact year/trim recordGold

Engine identity

Engine code

N62B48

Engine summary

4.8-liter V8 naturally aspirated petrol engine offered in 2006 globally; some markets had variations in power output due to emission and tuning differences.

Displacement

4799 cc

Power

306-360 hp (market-dependent)

Torque

450 Nm (332 lb-ft)

Fuel system

Electronic fuel injection with variable valve timing (VANOS) and variable intake manifold

Timing drive

Chain-driven double VANOS system

OBD port

Verify by VIN and market

Oils and fluids

Oil type

BMW Longlife-01 approved synthetic oil

Oil capacity

7.5 liters (including oil filter, service fill)

Coolant

12 liters approximate

Fluid

BMW-approved automatic transmission fluid (ATF)

Differential fluid

BMW standard rear differential oil

Brake fluid

BMW specification DOT4 brake fluid

Service and parts data

Manual transmission

Not available in 750i 2006

Automatic transmission

6-speed automatic (GM 6L50/6L60) adaptive transmission

Spark plugs

BMW OE spark plugs NGK or Bosch, iridium tipped recommended

Service interval

15,000 km / 12 months service interval recommended

Tire sizes

245/45 ZR18 front, 275/40 ZR18 rear (typical, can vary by market)

Wheel torque

Verify by VIN and market

Common and chronic problems

VANOS system wear
High pressure fuel pump failure
Valve stem seal wear leading to oil consumption

First checks

Oil leaks around valve cover gasket
Condition of VANOS solenoids
Oil level and service history

Before replacing parts

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

The 2006 BMW 750i globally shared the N62B48 V8 engine, with small power and equipment variations depending on emissions and market regulations.
Technical servicing requires BMW-compatible diagnostic tools for VANOS and transmission systems.

Common codes

Source and verification notes

BMW E65/E66 official technical documentation and repair manuals.
BMW enthusiast and technical forums cross-referenced with factory service bulletins from 2006.

Compatible tools

Verify by VIN and market

FAQ

What engine code does the 2006 BMW 7 Series 750i N62B48 (E65/E66) use? 2006 BMW 7 Series 750i N62B48 (E65/E66) is listed here with engine code N62B48; engine summary: 4.8-liter V8 naturally aspirated petrol engine offered in 2006 globally; some markets had variations in power output due to emission and tuning differences..
What oil and capacity does the 2006 BMW 7 Series 750i N62B48 (E65/E66) use? 2006 BMW 7 Series 750i N62B48 (E65/E66) is listed with BMW Longlife-01 approved synthetic oil and oil capacity 7.5 liters (including oil filter, service fill). Confirm market and engine option before service.
What are common 2006 BMW 7 Series 750i N62B48 (E65/E66) problems? Highlighted checks for 2006 BMW 7 Series 750i N62B48 (E65/E66): VANOS system wear, High pressure fuel pump failure, Valve stem seal wear leading to oil consumption.

Engine identity

Engine code

N62B48

Engine summary

4.8-liter V8 naturally aspirated petrol engine offered in 2006 globally; some markets had variations in power output due to emission and tuning differences.

Displacement

4799 cc

Power

306-360 hp (market-dependent)

Torque

450 Nm (332 lb-ft)

Fuel system

Electronic fuel injection with variable valve timing (VANOS) and variable intake manifold

Timing drive

Chain-driven double VANOS system

OBD port

Verify by VIN and market

Service and parts data

Manual transmission

Not available in 750i 2006

Automatic transmission

6-speed automatic (GM 6L50/6L60) adaptive transmission

Spark plugs

BMW OE spark plugs NGK or Bosch, iridium tipped recommended

Service interval

15,000 km / 12 months service interval recommended

Tire sizes

245/45 ZR18 front, 275/40 ZR18 rear (typical, can vary by market)

Wheel torque

Verify by VIN and market

FAQ

What engine code does the 2006 BMW 7 Series 750i N62B48 (E65/E66) use? 2006 BMW 7 Series 750i N62B48 (E65/E66) is listed here with engine code N62B48; engine summary: 4.8-liter V8 naturally aspirated petrol engine offered in 2006 globally; some markets had variations in power output due to emission and tuning differences..

What oil and capacity does the 2006 BMW 7 Series 750i N62B48 (E65/E66) use? 2006 BMW 7 Series 750i N62B48 (E65/E66) is listed with BMW Longlife-01 approved synthetic oil and oil capacity 7.5 liters (including oil filter, service fill). Confirm market and engine option before service.

What are common 2006 BMW 7 Series 750i N62B48 (E65/E66) problems? Highlighted checks for 2006 BMW 7 Series 750i N62B48 (E65/E66): VANOS system wear, High pressure fuel pump failure, Valve stem seal wear leading to oil consumption.

2006 BMW 7 Series 750i N62B48 (E65/E66)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes

Scanning Engine...

2006 BMW 7 Series 750i N62B48 (E65/E66)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes