2014 MITSUBISHI Mirage 3A92/3A90 (A00)

A00 / 5-door hatchback / Global (Asia, North America, Australia, and others; engine variants vary by market)

3A923A90Exact year/trim recordSilver

Engine identity

Engine code

3A92, 3A90

Engine summary

1.2L (3A92) and 1.0L (3A90) inline-3 DOHC 12-valve MIVEC engines with aluminum block and head, multipoint fuel injection

Displacement

1.2 L (1193 cc) and 1.0 L (998 cc)

Power

1.2L: approx. 78-80 hp (market dependent); 1.0L: approx. 69 hp

Torque

1.2L: ~100 Nm; 1.0L: ~88 Nm

Fuel system

Multi-point fuel injection

Timing drive

Timing chain

OBD port

Verify by VIN and market

Oils and fluids

Oil type

SAE 5W-30 or 10W-30, API SN or later

Oil capacity

Approx. 3.3 liters total service fill including filter change (2014 1.2L 3A92 engine)

Coolant

Approx. 5.5 liters

Fluid

Use Mitsubishi Diamond SP-IV CVT fluid for CVT; automatic uses Mitsubishi ATF-J4

Differential fluid

Use SAE 75W-90 GL-5 gear oil where applicable

Brake fluid

DOT 3 or DOT 4

Service and parts data

Manual transmission

5-speed manual available in many markets

Automatic transmission

Continuously Variable Transmission (CVT) or 4-speed automatic depending on market

Spark plugs

NGK or equivalent, gap around 0.8-0.9 mm

Service interval

Approximately every 10,000 km or 12 months

Tire sizes

165/65R14, 175/55R15 depending on market

Wheel torque

Verify by VIN and market

Common and chronic problems

Occasional CVT transmission issues reported in some markets
Minor suspension noise and wear with age

First checks

Oil and filter condition
CVT fluid level and condition (if equipped)
Timing chain noise
Cooling system leaks

Before replacing parts

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Engine and transmission specs vary slightly by regional market (e.g., North America vs Southeast Asia)
Oil capacity values include service fill with filter change; confirm with local service manual

Common codes

Source and verification notes

Mitsubishi Mirage 2014 official technical specifications catalogs from multiple markets
Global automotive technical service manuals and verified owner maintenance data

Compatible tools

Verify by VIN and market

FAQ

What engine code does the 2014 MITSUBISHI Mirage 3A92/3A90 (A00) use? 2014 MITSUBISHI Mirage 3A92/3A90 (A00) is listed here with engine code 3A92, 3A90; engine summary: 1.2L (3A92) and 1.0L (3A90) inline-3 DOHC 12-valve MIVEC engines with aluminum block and head, multipoint fuel injection.
What oil and capacity does the 2014 MITSUBISHI Mirage 3A92/3A90 (A00) use? 2014 MITSUBISHI Mirage 3A92/3A90 (A00) is listed with SAE 5W-30 or 10W-30, API SN or later and oil capacity Approx. 3.3 liters total service fill including filter change (2014 1.2L 3A92 engine). Confirm market and engine option before service.
What are common 2014 MITSUBISHI Mirage 3A92/3A90 (A00) problems? Highlighted checks for 2014 MITSUBISHI Mirage 3A92/3A90 (A00): Occasional CVT transmission issues reported in some markets, Minor suspension noise and wear with age.

Engine identity

Engine code

3A92, 3A90

Engine summary

1.2L (3A92) and 1.0L (3A90) inline-3 DOHC 12-valve MIVEC engines with aluminum block and head, multipoint fuel injection

Displacement

1.2 L (1193 cc) and 1.0 L (998 cc)

Power

1.2L: approx. 78-80 hp (market dependent); 1.0L: approx. 69 hp

Torque

1.2L: ~100 Nm; 1.0L: ~88 Nm

Fuel system

Multi-point fuel injection

Timing drive

Timing chain

OBD port

Verify by VIN and market

Oils and fluids

Oil type

SAE 5W-30 or 10W-30, API SN or later

Oil capacity

Approx. 3.3 liters total service fill including filter change (2014 1.2L 3A92 engine)

Coolant

Approx. 5.5 liters

Fluid

Use Mitsubishi Diamond SP-IV CVT fluid for CVT; automatic uses Mitsubishi ATF-J4

Differential fluid

Use SAE 75W-90 GL-5 gear oil where applicable

Brake fluid

DOT 3 or DOT 4

Service and parts data

Manual transmission

5-speed manual available in many markets

Automatic transmission

Continuously Variable Transmission (CVT) or 4-speed automatic depending on market

Spark plugs

NGK or equivalent, gap around 0.8-0.9 mm

Service interval

Approximately every 10,000 km or 12 months

Tire sizes

165/65R14, 175/55R15 depending on market

Wheel torque

Verify by VIN and market

FAQ

What engine code does the 2014 MITSUBISHI Mirage 3A92/3A90 (A00) use? 2014 MITSUBISHI Mirage 3A92/3A90 (A00) is listed here with engine code 3A92, 3A90; engine summary: 1.2L (3A92) and 1.0L (3A90) inline-3 DOHC 12-valve MIVEC engines with aluminum block and head, multipoint fuel injection.

What oil and capacity does the 2014 MITSUBISHI Mirage 3A92/3A90 (A00) use? 2014 MITSUBISHI Mirage 3A92/3A90 (A00) is listed with SAE 5W-30 or 10W-30, API SN or later and oil capacity Approx. 3.3 liters total service fill including filter change (2014 1.2L 3A92 engine). Confirm market and engine option before service.

What are common 2014 MITSUBISHI Mirage 3A92/3A90 (A00) problems? Highlighted checks for 2014 MITSUBISHI Mirage 3A92/3A90 (A00): Occasional CVT transmission issues reported in some markets, Minor suspension noise and wear with age.

2014 MITSUBISHI Mirage 3A92/3A90 (A00)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes

Scanning Engine...

2014 MITSUBISHI Mirage 3A92/3A90 (A00)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes