2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10)

AX10/A10 / Compact crossover SUV / Global (Europe, Japan, North America, Australia, others)

1NZ-FXE8NR-FTSM20A-FKS2ZR-FXEFiche exacte année/versionGold

Engine identity

Engine code

1NZ-FXE, 8NR-FTS, M20A-FKS, 2ZR-FXE

Engine summary

The 2019 Toyota C-HR was offered globally with a range of engines varying by region: Japan and Europe offered a 1.8L 2ZR-FXE hybrid and a 1.2L turbocharged 8NR-FTS petrol engine, North America offered the 2.0L M20A-FKS petrol engine, and some markets used the 1.5L 1NZ-FXE hybrid engine. Hybrid versions utilize Toyota's Hybrid Synergy Drive.

Displacement

1496cc, 1798cc, 1987cc

Power

From 116PS (1.2L turbo) up to 122PS (1.8L hybrid) to 144PS (2.0L petrol), depending on market and engine

Torque

185 Nm (1.2L turbo) up to ~190 Nm+ depending on engine variant

Fuel system

Multi-point fuel injection for petrol; hybrid electric powertrain for hybrid models

Timing drive

Chain-driven DOHC for petrol engines

Port OBD

Verify by VIN and market

Oils and fluids

Type d’huile

API SN or better, SAE 0W-20 typically recommended

Capacité d’huile

Approximately 4.6 liters including oil filter for 2.0L M20A-FKS petrol engine (service fill with filter change); varies slightly for 1.2L and 1.8L engines

Liquide de refroidissement

Approx. 6.9 liters depending on engine variant and market

Fluide

Toyota Genuine CVT Fluid FE or equivalent synthetic fluid for CVT; Toyota WS for 6-speed automatic

Differential fluid

Not typically specified due to front-wheel drive layout; 4WD models require appropriate fluid per regional Toyota specs

Liquide de frein

DOT 3 or DOT 4 (check regional spec)

Service and parts data

Manual transmission

6-speed manual available in select markets with 1.2L turbo engine

Automatic transmission

CVT standard on hybrid models; 7-speed CVT or a 6-speed automatic depending on market and engine

Spark plugs

Iridium-tipped recommended for petrol engines

Service interval

Typically 10,000 km or 12 months for oil/service; hybrid system checks per Toyota schedule

Dimensions des pneus

215/60R17, 225/50R18, 225/45R18

Couple de roue

Verify by VIN and market

Common and chronic problems

Early CVT belt wear reported in some turbocharged variants
Hybrid battery longevity generally reliable with regular maintenance

First checks

Check hybrid battery health (if applicable)
Inspect CVT for smooth operation and fluid condition
Verify timing chain noise uncommon

Avant de remplacer des pièces

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Configuration and engine availability vary significantly by market; 1.2L turbo mainly Europe and Japan, 2.0L NA, hybrid widely international
Oil and fluid capacities for hybrid and petrol engines differ; service data should be matched to specific engine and market

Codes courants

Source and verification notes

Toyota global 2019 C-HR technical brochures and owner manuals
European and North American Toyota official service documentation for 2019 C-HR

Outils compatibles

Verify by VIN and market

Questions fréquentes

What engine code does the 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) use? 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) is listed here with engine code 1NZ-FXE, 8NR-FTS, M20A-FKS, 2ZR-FXE; engine summary: The 2019 Toyota C-HR was offered globally with a range of engines varying by region: Japan and Europe offered a 1.8L 2ZR-FXE hybrid and a 1.2L turbocharged 8NR-FTS petrol engine, North America offered the 2.0L M20A-FKS petrol engine, and some markets used the 1.5L 1NZ-FXE hybrid engine. Hybrid versions utilize Toyota's Hybrid Synergy Drive..
What oil and capacity does the 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) use? 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) is listed with API SN or better, SAE 0W-20 typically recommended and oil capacity Approximately 4.6 liters including oil filter for 2.0L M20A-FKS petrol engine (service fill with filter change); varies slightly for 1.2L and 1.8L engines. Confirm market and engine option before service.
What are common 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) problems? Highlighted checks for 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10): Early CVT belt wear reported in some turbocharged variants, Hybrid battery longevity generally reliable with regular maintenance.

Engine identity

Engine code

1NZ-FXE, 8NR-FTS, M20A-FKS, 2ZR-FXE

Engine summary

Displacement

1496cc, 1798cc, 1987cc

Power

From 116PS (1.2L turbo) up to 122PS (1.8L hybrid) to 144PS (2.0L petrol), depending on market and engine

Torque

185 Nm (1.2L turbo) up to ~190 Nm+ depending on engine variant

Fuel system

Multi-point fuel injection for petrol; hybrid electric powertrain for hybrid models

Timing drive

Chain-driven DOHC for petrol engines

Port OBD

Verify by VIN and market

Oils and fluids

Type d’huile

API SN or better, SAE 0W-20 typically recommended

Capacité d’huile

Approximately 4.6 liters including oil filter for 2.0L M20A-FKS petrol engine (service fill with filter change); varies slightly for 1.2L and 1.8L engines

Liquide de refroidissement

Approx. 6.9 liters depending on engine variant and market

Fluide

Toyota Genuine CVT Fluid FE or equivalent synthetic fluid for CVT; Toyota WS for 6-speed automatic

Differential fluid

Not typically specified due to front-wheel drive layout; 4WD models require appropriate fluid per regional Toyota specs

Liquide de frein

DOT 3 or DOT 4 (check regional spec)

Service and parts data

Manual transmission

6-speed manual available in select markets with 1.2L turbo engine

Automatic transmission

CVT standard on hybrid models; 7-speed CVT or a 6-speed automatic depending on market and engine

Spark plugs

Iridium-tipped recommended for petrol engines

Service interval

Typically 10,000 km or 12 months for oil/service; hybrid system checks per Toyota schedule

Dimensions des pneus

215/60R17, 225/50R18, 225/45R18

Couple de roue

Verify by VIN and market

Questions fréquentes

What engine code does the 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) use? 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) is listed here with engine code 1NZ-FXE, 8NR-FTS, M20A-FKS, 2ZR-FXE; engine summary: The 2019 Toyota C-HR was offered globally with a range of engines varying by region: Japan and Europe offered a 1.8L 2ZR-FXE hybrid and a 1.2L turbocharged 8NR-FTS petrol engine, North America offered the 2.0L M20A-FKS petrol engine, and some markets used the 1.5L 1NZ-FXE hybrid engine. Hybrid versions utilize Toyota's Hybrid Synergy Drive..

What oil and capacity does the 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) use? 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) is listed with API SN or better, SAE 0W-20 typically recommended and oil capacity Approximately 4.6 liters including oil filter for 2.0L M20A-FKS petrol engine (service fill with filter change); varies slightly for 1.2L and 1.8L engines. Confirm market and engine option before service.

What are common 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10) problems? Highlighted checks for 2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10): Early CVT belt wear reported in some turbocharged variants, Hybrid battery longevity generally reliable with regular maintenance.

2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Avant de remplacer des pièces

Important notes

Scanning Engine...

2019 Toyota C-HR 1NZ-FXE/8NR-FTS (AX10/A10)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Avant de remplacer des pièces

Important notes