2020 HONDA Accord K20C4/LFA1 (CV)

CV / Sedan / Global (with variations in North America, Europe, and Asia)

K20C4LFA1P10A6Exact year/trim recordSilver

Engine identity

Engine code

K20C4, LFA1, P10A6

Engine summary

The 2020 Honda Accord globally featured primarily a 1.5L turbocharged inline-4 (LFA1) and a 2.0L turbocharged inline-4 (K20C4). Some Asian markets also had a 2.0L naturally aspirated I4 (P10A6). Hybrid variants used a 2.0L Atkinson cycle engine paired with electric motors.

Displacement

1498 cc (LFA1), 1996 cc (K20C4), 1996 cc (P10A6)

Power

192 hp @ 5500 rpm (LFA1), 252 hp @ 6500 rpm (K20C4), approx. 158 hp (P10A6 NA)

Torque

192 lb-ft @ 1500-5500 rpm (LFA1), 273 lb-ft @ 1500-4500 rpm (K20C4), approx. 140 lb-ft (P10A6 NA)

Fuel system

Direct injection and port fuel injection (varies by engine code)

Timing drive

Chain-driven dual overhead camshafts with VTEC

OBD port

Verify by VIN and market

Oils and fluids

Oil type

SAE 0W-20 API SN or higher

Oil capacity

Approximately 4.4 liters (service-fill including filter), varies slightly by engine and market

Coolant

Around 6.5 liters including heater core

Fluid

Honda HCF-2 CVT fluid for CVT; ATF DW-1 for 10-speed automatic

Differential fluid

Not typically required (FWD-based platform)

Brake fluid

DOT 3 or DOT 4 (market-specific)

Service and parts data

Manual transmission

6-speed manual available on select trims/markets for the 1.5L engine

Automatic transmission

Continuously Variable Transmission (CVT) for 1.5L engine; 10-speed automatic for 2.0L engine

Spark plugs

Iridium type recommended; gap 0.044 inches (1.1 mm)

Service interval

Oil change every 7,500 to 10,000 miles depending on market and driving conditions

Tire sizes

235/40R19, 235/45R18, 235/50R17

Wheel torque

Verify by VIN and market

Common and chronic problems

Occasional transmission hesitation on 1.5L CVT models
Minor oil consumption in 2.0L turbo models under high load

First checks

Inspect transmission fluid condition frequently on CVT models
Check for any turbocharger noise or hesitation on 2.0L engines

Before replacing parts

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Hybrid version with unique powertrain detailed separately.
Engine and transmission availability vary notably between North America and Asia markets.
Oil capacity given is approximate; consult service manual for exact values per variant.

Common codes

Source and verification notes

2020 Honda Accord Technical Specifications from official Honda Owner's manuals and service documents.
Global market reviews and technical data cross-checked from automotive databases including JATO Dynamics.

Compatible tools

Verify by VIN and market

FAQ

What engine code does the 2020 HONDA Accord K20C4/LFA1 (CV) use? 2020 HONDA Accord K20C4/LFA1 (CV) is listed here with engine code K20C4, LFA1, P10A6; engine summary: The 2020 Honda Accord globally featured primarily a 1.5L turbocharged inline-4 (LFA1) and a 2.0L turbocharged inline-4 (K20C4). Some Asian markets also had a 2.0L naturally aspirated I4 (P10A6). Hybrid variants used a 2.0L Atkinson cycle engine paired with electric motors..
What oil and capacity does the 2020 HONDA Accord K20C4/LFA1 (CV) use? 2020 HONDA Accord K20C4/LFA1 (CV) is listed with SAE 0W-20 API SN or higher and oil capacity Approximately 4.4 liters (service-fill including filter), varies slightly by engine and market. Confirm market and engine option before service.
What are common 2020 HONDA Accord K20C4/LFA1 (CV) problems? Highlighted checks for 2020 HONDA Accord K20C4/LFA1 (CV): Occasional transmission hesitation on 1.5L CVT models, Minor oil consumption in 2.0L turbo models under high load.

Engine identity

Engine code

K20C4, LFA1, P10A6

Engine summary

Displacement

1498 cc (LFA1), 1996 cc (K20C4), 1996 cc (P10A6)

Power

192 hp @ 5500 rpm (LFA1), 252 hp @ 6500 rpm (K20C4), approx. 158 hp (P10A6 NA)

Torque

192 lb-ft @ 1500-5500 rpm (LFA1), 273 lb-ft @ 1500-4500 rpm (K20C4), approx. 140 lb-ft (P10A6 NA)

Fuel system

Direct injection and port fuel injection (varies by engine code)

Timing drive

Chain-driven dual overhead camshafts with VTEC

OBD port

Verify by VIN and market

Oils and fluids

Oil type

SAE 0W-20 API SN or higher

Oil capacity

Approximately 4.4 liters (service-fill including filter), varies slightly by engine and market

Coolant

Around 6.5 liters including heater core

Fluid

Honda HCF-2 CVT fluid for CVT; ATF DW-1 for 10-speed automatic

Differential fluid

Not typically required (FWD-based platform)

Brake fluid

DOT 3 or DOT 4 (market-specific)

Service and parts data

Manual transmission

6-speed manual available on select trims/markets for the 1.5L engine

Automatic transmission

Continuously Variable Transmission (CVT) for 1.5L engine; 10-speed automatic for 2.0L engine

Spark plugs

Iridium type recommended; gap 0.044 inches (1.1 mm)

Service interval

Oil change every 7,500 to 10,000 miles depending on market and driving conditions

Tire sizes

235/40R19, 235/45R18, 235/50R17

Wheel torque

Verify by VIN and market

FAQ

What engine code does the 2020 HONDA Accord K20C4/LFA1 (CV) use? 2020 HONDA Accord K20C4/LFA1 (CV) is listed here with engine code K20C4, LFA1, P10A6; engine summary: The 2020 Honda Accord globally featured primarily a 1.5L turbocharged inline-4 (LFA1) and a 2.0L turbocharged inline-4 (K20C4). Some Asian markets also had a 2.0L naturally aspirated I4 (P10A6). Hybrid variants used a 2.0L Atkinson cycle engine paired with electric motors..

What oil and capacity does the 2020 HONDA Accord K20C4/LFA1 (CV) use? 2020 HONDA Accord K20C4/LFA1 (CV) is listed with SAE 0W-20 API SN or higher and oil capacity Approximately 4.4 liters (service-fill including filter), varies slightly by engine and market. Confirm market and engine option before service.

What are common 2020 HONDA Accord K20C4/LFA1 (CV) problems? Highlighted checks for 2020 HONDA Accord K20C4/LFA1 (CV): Occasional transmission hesitation on 1.5L CVT models, Minor oil consumption in 2.0L turbo models under high load.

2020 HONDA Accord K20C4/LFA1 (CV)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes

Scanning Engine...

2020 HONDA Accord K20C4/LFA1 (CV)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Before replacing parts

Important notes