2008 MAZDA MX-5 LF-VE/KL-VE (NC)

NC / Roadster / Convertible / Global / main markets include Japan, Europe, North America

LF-VEKL-VERegistro exacto de año/versiónGold

Engine identity

Engine code

LF-VE, KL-VE

Engine summary

The 2008 Mazda MX-5 NC generation mainly used 2.0L and 1.8L inline-4 gasoline engines with variable valve timing (VVT). Japan and Europe typically had the 1.8L LF-VE, while North America and some markets featured the 2.0L KL-VE engine.

Displacement

1798 cc (1.8L), 1998 cc (2.0L)

Power

126-160 hp depending on engine and market

Torque

122-136 lb-ft depending on engine and market

Fuel system

Multi-point fuel injection with Variable Valve Timing

Timing drive

Timing chain

Puerto OBD

Verify by VIN and market

Oils and fluids

Tipo de aceite

SAE 5W-30 engine oil meeting API SN or newer

Capacidad de aceite

Approximately 4.3 L (4.5 US qt) including filter; service fill with filter change

Refrigerante

Approximately 6.0 L

Fluido

Mazda Genuine Fluid M5

Differential fluid

SAE 75W-90 gear oil

Líquido de frenos

DOT 3 or DOT 4

Service and parts data

Manual transmission

6-speed manual with dual-mass flywheel

Automatic transmission

6-speed automatic available on some markets

Spark plugs

Iridium-tipped, gap ~0.044 in (1.1 mm)

Service interval

10,000-15,000 km or 12 months, whichever comes first

Medidas de neumáticos

205/45 R17 (European spec), 195/50 R16 (some markets)

Torque de rueda

Verify by VIN and market

Common and chronic problems

Soft top mechanism wear
Minor rust in wheel arches
Clutch wear on manual models

First checks

Timing chain noise
Soft top hydraulic system
Condition of ignition coils

Antes de cambiar piezas

Save fault codes and freeze-frame data before clearing anything.
Check engine oil, coolant and transmission fluid using the correct temperature and service procedure.
Verify power, ground, connectors, hoses, leaks and live data before replacing expensive parts.

Important notes

Some market-specific variations exist, especially in power outputs and transmissions.
The NC generation MX-5 introduced independent multilink rear suspension replacing the previous torsion beam.

Códigos comunes

Source and verification notes

Mazda official technical service manuals for NC MX-5 (2006-2015)
Global Mazda MX-5 community and reliable automotive database cross-referencing

Herramientas compatibles

Verify by VIN and market

Preguntas frecuentes

What engine code does the 2008 MAZDA MX-5 LF-VE/KL-VE (NC) use? 2008 MAZDA MX-5 LF-VE/KL-VE (NC) is listed here with engine code LF-VE, KL-VE; engine summary: The 2008 Mazda MX-5 NC generation mainly used 2.0L and 1.8L inline-4 gasoline engines with variable valve timing (VVT). Japan and Europe typically had the 1.8L LF-VE, while North America and some markets featured the 2.0L KL-VE engine..
What oil and capacity does the 2008 MAZDA MX-5 LF-VE/KL-VE (NC) use? 2008 MAZDA MX-5 LF-VE/KL-VE (NC) is listed with SAE 5W-30 engine oil meeting API SN or newer and oil capacity Approximately 4.3 L (4.5 US qt) including filter; service fill with filter change. Confirm market and engine option before service.
What are common 2008 MAZDA MX-5 LF-VE/KL-VE (NC) problems? Highlighted checks for 2008 MAZDA MX-5 LF-VE/KL-VE (NC): Soft top mechanism wear, Minor rust in wheel arches, Clutch wear on manual models.

Engine identity

Engine code

LF-VE, KL-VE

Engine summary

Displacement

1798 cc (1.8L), 1998 cc (2.0L)

Power

126-160 hp depending on engine and market

Torque

122-136 lb-ft depending on engine and market

Fuel system

Multi-point fuel injection with Variable Valve Timing

Timing drive

Timing chain

Puerto OBD

Verify by VIN and market

Service and parts data

Manual transmission

6-speed manual with dual-mass flywheel

Automatic transmission

6-speed automatic available on some markets

Spark plugs

Iridium-tipped, gap ~0.044 in (1.1 mm)

Service interval

10,000-15,000 km or 12 months, whichever comes first

Medidas de neumáticos

205/45 R17 (European spec), 195/50 R16 (some markets)

Torque de rueda

Verify by VIN and market

Preguntas frecuentes

What engine code does the 2008 MAZDA MX-5 LF-VE/KL-VE (NC) use? 2008 MAZDA MX-5 LF-VE/KL-VE (NC) is listed here with engine code LF-VE, KL-VE; engine summary: The 2008 Mazda MX-5 NC generation mainly used 2.0L and 1.8L inline-4 gasoline engines with variable valve timing (VVT). Japan and Europe typically had the 1.8L LF-VE, while North America and some markets featured the 2.0L KL-VE engine..

What oil and capacity does the 2008 MAZDA MX-5 LF-VE/KL-VE (NC) use? 2008 MAZDA MX-5 LF-VE/KL-VE (NC) is listed with SAE 5W-30 engine oil meeting API SN or newer and oil capacity Approximately 4.3 L (4.5 US qt) including filter; service fill with filter change. Confirm market and engine option before service.

What are common 2008 MAZDA MX-5 LF-VE/KL-VE (NC) problems? Highlighted checks for 2008 MAZDA MX-5 LF-VE/KL-VE (NC): Soft top mechanism wear, Minor rust in wheel arches, Clutch wear on manual models.

2008 MAZDA MX-5 LF-VE/KL-VE (NC)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Antes de cambiar piezas

Important notes

Scanning Engine...

2008 MAZDA MX-5 LF-VE/KL-VE (NC)

Engine identity

Oils and fluids

Service and parts data

Common and chronic problems

First checks

Antes de cambiar piezas

Important notes